mkjj
Mar 4, 10:04 AM
Better start saving! quite a rare beast to find good complete units.
Cost me a small fortune for my units, mind you I had to get mine from Japan!
Cost me a small fortune for my units, mind you I had to get mine from Japan!
hotsnuglemonstr
Jun 24, 12:25 AM
anyone mind doing an update upon their arrive for the rest of us?
iGary
Dec 2, 06:48 PM
All the Ebay scammers are running from there to Scamlist.
njaremka
Mar 23, 01:11 PM
can you borrow a keyboard from your neighbor?
TheWitePony
Jul 25, 08:16 PM
Here is a screen shot. As you can see the Print Center can see my printer, yet it says that I have no drivers insalled. And apparently I nee some drivers because I cannot click add to add the printer. Also, I just downloaded gimp print and it did not seem to work either. I believe that there is some problem with the all in one printers. This is unfortunate, i was planning on using the same printer between my PC and my Mac. I guess I'm going to have to network or move my files to my PC if I ever need to print anything, which is going to be a pain....because I refuse to buy another printer, one should be enough.
GGJstudios
Mar 16, 11:10 AM
Thanks, just what I was looking for.
They keep it hidden! :D
276358
They keep it hidden! :D
276358
Dav1
Apr 1, 10:05 PM
I can't figure this one out. I successfully jailbroke my 1st gen iPad after using pwnage tool and tetheredboot.
However when I open cydia and do the required updates it asks me to reboot, so I do so but it keeps on going through a boot loop.
I then put it in DFU and do the tetheredboot command in terminal but it fails every time saying:
Macintosh-6:~ Eddy$ /Users/Eddy/Desktop/tetheredboot/tetheredboot -i/Users/Eddy/Desktop/tetheredboot/iBSS.k48ap.RELEASE.dfu -k/Users/Eddy/Desktop/tetheredboot/kernelcache.release.k48
Initializing libpois0n
Waiting for device to enter DFU mode
opening device 05ac:1227...
Found device in DFU mode
Checking if device is compatible with this jailbreak
Checking the device type
Identified device as iPad1,1
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb:error [darwin_transfer_status] transfer error: timed out
libusb:error [darwin_reset_device] ResetDevice: device not responding
Exploit sent
Reconnecting to device
libusb:error [darwin_close] USBDeviceClose: no connection to an IOService
Waiting 2 seconds for the device to pop up...
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Command completed successfully
Unable to reconnect
Unable to upload exploit data
Exploit injection failed!
So then my only option is to restore again through itunes and rejailbreak which means I loose the updates I install. I've done this about 5 times now and it's really pissing me off.
Is snowbreeze more reliable then the method I'm using? If so I may have to boot in bootcamp and try.
I'm not a Mac user but I believe your issue is with libusb If you google on this you'll see it is a common error, I believe you'll also find info on how to correct the issue...
Hope that helps to get you started...
However when I open cydia and do the required updates it asks me to reboot, so I do so but it keeps on going through a boot loop.
I then put it in DFU and do the tetheredboot command in terminal but it fails every time saying:
Macintosh-6:~ Eddy$ /Users/Eddy/Desktop/tetheredboot/tetheredboot -i/Users/Eddy/Desktop/tetheredboot/iBSS.k48ap.RELEASE.dfu -k/Users/Eddy/Desktop/tetheredboot/kernelcache.release.k48
Initializing libpois0n
Waiting for device to enter DFU mode
opening device 05ac:1227...
Found device in DFU mode
Checking if device is compatible with this jailbreak
Checking the device type
Identified device as iPad1,1
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb:error [darwin_transfer_status] transfer error: timed out
libusb:error [darwin_reset_device] ResetDevice: device not responding
Exploit sent
Reconnecting to device
libusb:error [darwin_close] USBDeviceClose: no connection to an IOService
Waiting 2 seconds for the device to pop up...
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Command completed successfully
Unable to reconnect
Unable to upload exploit data
Exploit injection failed!
So then my only option is to restore again through itunes and rejailbreak which means I loose the updates I install. I've done this about 5 times now and it's really pissing me off.
Is snowbreeze more reliable then the method I'm using? If so I may have to boot in bootcamp and try.
I'm not a Mac user but I believe your issue is with libusb If you google on this you'll see it is a common error, I believe you'll also find info on how to correct the issue...
Hope that helps to get you started...
toxthexnines
Oct 19, 12:41 AM
Anybody in tulsa going to the apple store in woodland hills for leopard?
lexfuzo
Sep 27, 05:37 PM
Compared to the G3 it will be a rocket.
The mini is certainly good value for its price.
Make sure you max out the RAM.
The mini is certainly good value for its price.
Make sure you max out the RAM.
krossfyter
Nov 3, 06:37 AM
jefhatfield is oldskool!
better believe it.
better believe it.
nick1516
Feb 17, 09:19 PM
The only one I have:
Metallica- Orgullo, Pasion, Y Gloria (the 2009 mexico city 2 dvd + 2 cd set)
Metallica- Orgullo, Pasion, Y Gloria (the 2009 mexico city 2 dvd + 2 cd set)
Stella
Jul 23, 12:20 PM
XCode 4 looks like its going to take a big step foward. Hopefully as large as the one between ProjectBuilder and XCode.
I'm really looking forward to this. Any know of a possible release date?
I'm really looking forward to this. Any know of a possible release date?
BillyBobBongo
Mar 11, 06:48 AM
Whilst I appreciate that you have to have Ads on the site to generate revenue, there have been a few that pop up during the last few weeks with sound in them (I've attached an image of one such ad).
I actually make Flash based Ads from time to time and the guidelines are always clear that sound shouldn't be playing without either a rollover event or a user interaction.
I don't suppose you can removed/do something about these...they're really ruining my Pink Floyd.
Cheers!
Edit: Just seen another thread on this...sorry, I didn't check before posting.
I actually make Flash based Ads from time to time and the guidelines are always clear that sound shouldn't be playing without either a rollover event or a user interaction.
I don't suppose you can removed/do something about these...they're really ruining my Pink Floyd.
Cheers!
Edit: Just seen another thread on this...sorry, I didn't check before posting.
Bluemeanie1976
Apr 13, 10:59 AM
What file are you trying to download? Do you have a link. I can Dow oaf to airsharing, or file browser. Do you have a file handling app at all?
InfiniteLoopy
May 1, 04:47 AM
Regarding MAMP:
If I install in on a Mac which is on a LAN, can other computers on the same network access it or the sites it's hosting?
Can anyone confirm that people can't access it via the web as well? (Just want to be sure that I don't get it messed up or visible before I want it to go live.)
Thanks,
If I install in on a Mac which is on a LAN, can other computers on the same network access it or the sites it's hosting?
Can anyone confirm that people can't access it via the web as well? (Just want to be sure that I don't get it messed up or visible before I want it to go live.)
Thanks,
tech4all
Oct 7, 04:24 PM
http://blog.deconcept.com/flashobject/
Thanks, kingjr3, I'll check out!
Thanks, kingjr3, I'll check out!
djaeggi
Dec 20, 04:39 AM
Hi folks,
Longtime reader, first time posting anything.
Can anyone offer a critique of this?
It's going to be printed on a 4'x8' vinyl banner to be displayed outdoors. I'm not a designer and I've looked at this thing for so long that I can't even tell what works and what doesn't. It'd be nice to get a fresh pair of eyes on it.
I'm sending this to the print shop to silkscreen several hundred of these, so any advice you can offer would be greatly appreciated.
Thanks all.
Longtime reader, first time posting anything.
Can anyone offer a critique of this?
It's going to be printed on a 4'x8' vinyl banner to be displayed outdoors. I'm not a designer and I've looked at this thing for so long that I can't even tell what works and what doesn't. It'd be nice to get a fresh pair of eyes on it.
I'm sending this to the print shop to silkscreen several hundred of these, so any advice you can offer would be greatly appreciated.
Thanks all.
Legion93
Apr 29, 07:37 PM
I jailbroke it because now I can add cydia apps that bypass some shortcomings of the native iPad (password protecting specific apps, mail enhancements, widgets, etc)
In my second post on this thread, I stated that I just reset the iPad and still have the same problem.
Just go to an Apple retail store, they'll fix it for you. Worst case scenario you'll get a replacement but since you jail broke the device, it may void the warranty without the exception of this issue. You don't seem to be clear enough of your problem.
Did you have this issue of the apps icon disappearing before you jail broke it? If you did, why didn't you go to Apple to look at it for you?
Or... Did this happen after jail breaking and the problem still persists even after factory reset?
In my second post on this thread, I stated that I just reset the iPad and still have the same problem.
Just go to an Apple retail store, they'll fix it for you. Worst case scenario you'll get a replacement but since you jail broke the device, it may void the warranty without the exception of this issue. You don't seem to be clear enough of your problem.
Did you have this issue of the apps icon disappearing before you jail broke it? If you did, why didn't you go to Apple to look at it for you?
Or... Did this happen after jail breaking and the problem still persists even after factory reset?
CaptainCaveMann
Nov 28, 07:22 PM
It all depends. I liked the V600 better than the V400 for these reasons.
It was made out of Metal/Aluminium instead of plastic.
I seemed to be able to hear better on it. Although i think it was do mainly to ergonomics.
I liked the look and feel of it much better. To me the V400 was the beta, and the V600 was the final product.
I value style, and durability, so I went with the V600. Also, I had a V60 which I loved. Possibly the best phone I have ever owned, and the V600 remind me much of it. I'm sure was a big part of my decision.
And as for battery life, if I remember correctly it was about the same. No huge difference.
So I guess if your an average user, The V400 is a good fit.
BTW, I dont think Cingular sells the V600 anymore. I think they replaced it with a 500 series phone. Which is made out of plastic :(Well im using the samsung sgh-x427 non m model and i like it except for the fact that it will only hold 3 downloaded full audio ring tones which is freakin lame imo only 3!! I mean come on. Also its not a camera phone and the battery is less than satisfactory. I want a camera phone with great battery life, i do a lot of text meseging and on the phone all the time i want something that will last me at least 4 days without having to run to my life saving charger. Am i asking to much? ah well come on cingular the technology is there isnt it :cool:
It was made out of Metal/Aluminium instead of plastic.
I seemed to be able to hear better on it. Although i think it was do mainly to ergonomics.
I liked the look and feel of it much better. To me the V400 was the beta, and the V600 was the final product.
I value style, and durability, so I went with the V600. Also, I had a V60 which I loved. Possibly the best phone I have ever owned, and the V600 remind me much of it. I'm sure was a big part of my decision.
And as for battery life, if I remember correctly it was about the same. No huge difference.
So I guess if your an average user, The V400 is a good fit.
BTW, I dont think Cingular sells the V600 anymore. I think they replaced it with a 500 series phone. Which is made out of plastic :(Well im using the samsung sgh-x427 non m model and i like it except for the fact that it will only hold 3 downloaded full audio ring tones which is freakin lame imo only 3!! I mean come on. Also its not a camera phone and the battery is less than satisfactory. I want a camera phone with great battery life, i do a lot of text meseging and on the phone all the time i want something that will last me at least 4 days without having to run to my life saving charger. Am i asking to much? ah well come on cingular the technology is there isnt it :cool:
thermodynamic
Apr 22, 06:34 PM
Charge him 20 dollars and a lap dance at your favourite strip club for it. That's a fair market price for a 4 year old computer.
Why be slave to market forces and what they dictate? But I digress.
As was said, eBay is going to give a more accurate representation and, unlike OEM PC brands, Macs hold their value rather better.
Why be slave to market forces and what they dictate? But I digress.
As was said, eBay is going to give a more accurate representation and, unlike OEM PC brands, Macs hold their value rather better.
Over Achiever
Sep 30, 08:14 AM
Interesting...the first pic like arn said was already discussed. As for the second pic...maybe the ti will get a radeon 9000. Will it be 32 MB or 64 MB...i'm hopin' 64 MB. Depends on whether the next update is october or beyond...
iMJustAGuy
May 25, 07:58 PM
I'm not sure I understand you. The 13" MacBook Pro affected by this update is the latest model. I certainly would call it new.
I was referring to bootcamp itself, not the machine.
I was referring to bootcamp itself, not the machine.
iFiend
Apr 28, 03:46 PM
I know this might be a stupid question but i have been googling for hours now and i cannot find a solution.
Is there a way to unlock any other basebands off the iPhone 4 not only 1.59.00 that ultrasn0w does.? And if so can you please supply a list of the basebands that are unlockable with Verson 4.0iOS and up.?
The iOS version has nothing to do with unlocking, only the baseband matters. Now the only free way to unlock an iPhone 4 is with ultrasn0w and it must be baseband 1.59.00. You can however use a Gevey SIM or have a company do it for you. These will cost money.
Is there a way to unlock any other basebands off the iPhone 4 not only 1.59.00 that ultrasn0w does.? And if so can you please supply a list of the basebands that are unlockable with Verson 4.0iOS and up.?
The iOS version has nothing to do with unlocking, only the baseband matters. Now the only free way to unlock an iPhone 4 is with ultrasn0w and it must be baseband 1.59.00. You can however use a Gevey SIM or have a company do it for you. These will cost money.
seubjoh
Mar 23, 12:04 PM
So I have a 2009 Mac Mini which I installed boot camp on and a windows 7 buisness 32 bit installation. It now only boots into that operating system. Holding down the x,c,alt/option keys at start up do nothing. The only thing it seems to respond to is the mouse to eject a disk. This probably means I have a bad keyboard but I typed this entire post with it and I don't have another keyboard in the house to test the theory with (except PS/2 inputs).
Any thoughts? Unfortunately I just brought this mac mini from school and left all my disks there so it might just be I didnt finish the boot camp install in windows, is there any way to get around this?
Thanks!
Any thoughts? Unfortunately I just brought this mac mini from school and left all my disks there so it might just be I didnt finish the boot camp install in windows, is there any way to get around this?
Thanks!
No comments:
Post a Comment